falcon6667's Photobucket root album media

IMG_0199.jpg

falcon6667 — Thu, 26 Nov 2009 15:49:52 MST

falcon6667 posted a photo

IMG_0199.jpg

img_44982.jpg

falcon6667 — Sun, 3 May 2009 04:45:12 MDT

falcon6667 posted a photo

img_44982.jpg

IMAGE1.jpg

falcon6667 — Sat, 8 Nov 2008 05:24:01 MST

falcon6667 posted a photo

IMAGE1.jpg

at the gathering 08

falcon6667 — Fri, 7 Nov 2008 03:06:01 MST

falcon6667 posted a photo

at the gathering 08 - IMG_3124.jpg

IMG_2785.jpg

falcon6667 — Fri, 7 Nov 2008 03:02:55 MST

falcon6667 posted a photo

IMG_2785.jpg

IMG_3964.jpg

falcon6667 — Mon, 26 May 2008 05:02:48 MDT

falcon6667 posted a photo

IMG_3964.jpg

IMG_4175.jpg

falcon6667 — Mon, 26 May 2008 04:29:43 MDT

falcon6667 posted a photo

IMG_4175.jpg

IMG_0838.jpg

falcon6667 — Mon, 26 May 2008 04:29:42 MDT

falcon6667 posted a photo

IMG_0838.jpg

IMG_0835.jpg

falcon6667 — Mon, 26 May 2008 04:28:32 MDT

falcon6667 posted a photo

IMG_0835.jpg

img_39132.jpg

falcon6667 — Fri, 23 May 2008 14:40:27 MDT

falcon6667 posted a photo

img_39132.jpg

IMG_0826.jpg

falcon6667 — Wed, 21 May 2008 18:32:53 MDT

falcon6667 posted a photo

IMG_0826.jpg

IMG_0800.jpg

falcon6667 — Wed, 21 May 2008 18:31:23 MDT

falcon6667 posted a photo

IMG_0800.jpg

IMG_0805.jpg

falcon6667 — Wed, 21 May 2008 18:30:11 MDT

falcon6667 posted a photo

IMG_0805.jpg

IMG_0379.jpg

falcon6667 — Fri, 25 Apr 2008 17:28:35 MDT

falcon6667 posted a photo

IMG_0379.jpg

IMG_0357.jpg

falcon6667 — Fri, 25 Apr 2008 17:27:19 MDT

falcon6667 posted a photo

IMG_0357.jpg

IMG_0315.jpg

falcon6667 — Fri, 25 Apr 2008 17:22:35 MDT

falcon6667 posted a photo

IMG_0315.jpg

IMG_0412.jpg

falcon6667 — Fri, 25 Apr 2008 17:21:19 MDT

falcon6667 posted a photo

IMG_0412.jpg

IMG_0411.jpg

falcon6667 — Fri, 25 Apr 2008 17:19:38 MDT

falcon6667 posted a photo

IMG_0411.jpg

IMG_0907.jpg

falcon6667 — Mon, 24 Dec 2007 18:36:03 MST

falcon6667 posted a photo

IMG_0907.jpg

IMG_0903.jpg

falcon6667 — Mon, 24 Dec 2007 18:14:35 MST

falcon6667 posted a photo

IMG_0903.jpg

IMG_0896.jpg

falcon6667 — Mon, 24 Dec 2007 18:13:16 MST

falcon6667 posted a photo

IMG_0896.jpg

100_4906.jpg

falcon6667 — Sat, 4 Aug 2007 18:17:36 MDT

falcon6667 posted a photo

100_4906.jpg

100_4905.jpg

falcon6667 — Sat, 4 Aug 2007 18:16:31 MDT

falcon6667 posted a photo

100_4905.jpg

100_4903.jpg

falcon6667 — Sat, 4 Aug 2007 18:15:44 MDT

falcon6667 posted a photo

100_4903.jpg

100_4902.jpg

falcon6667 — Fri, 3 Aug 2007 18:08:21 MDT

falcon6667 posted a photo

100_4902.jpg

100_4901.jpg

falcon6667 — Fri, 3 Aug 2007 18:07:16 MDT

falcon6667 posted a photo

100_4901.jpg

100_4883.jpg

falcon6667 — Fri, 3 Aug 2007 18:06:21 MDT

falcon6667 posted a photo

100_4883.jpg

100_1961.jpg

falcon6667 — Fri, 3 Aug 2007 18:05:12 MDT

falcon6667 posted a photo

100_1961.jpg

100_1958.jpg

falcon6667 — Fri, 3 Aug 2007 18:03:49 MDT

falcon6667 posted a photo

100_1958.jpg

hatch open

falcon6667 — Fri, 13 Apr 2007 04:53:55 MDT

falcon6667 posted a photo

hatch open - 100_1735.jpg

aft hatch

falcon6667 — Fri, 13 Apr 2007 04:53:29 MDT

falcon6667 posted a photo

aft hatch - 100_1733.jpg

hatchs compleet, i am using a air cooled 20 hp wisconson for inboard power so this will give it plenty of air

falcon6667 — Fri, 13 Apr 2007 04:53:02 MDT

falcon6667 posted a photo

hatchs compleet, i am using a air cooled 20 hp wisconson for inboard power so this will give it plenty of air - 100_1713.jpg

laying out the aft decking hatches

falcon6667 — Fri, 13 Apr 2007 04:48:30 MDT

falcon6667 posted a photo

laying out the aft decking hatches - 100_1703.jpg

taking shape

falcon6667 — Sat, 17 Mar 2007 13:48:51 MDT

falcon6667 posted a photo

taking shape - 100_0829.jpg

with standoffs in place the frist piece of the grab rail

falcon6667 — Fri, 16 Mar 2007 15:40:36 MDT

falcon6667 posted a photo

with standoffs in place the frist piece of the grab rail - 100_0819.jpg

2nd piece

falcon6667 — Fri, 16 Mar 2007 15:39:40 MDT

falcon6667 posted a photo

2nd piece - 100_0804.jpg

Installing the frist of many steam bent oak pices for the round frunt cockpit cowling

falcon6667 — Fri, 16 Mar 2007 15:38:40 MDT

falcon6667 posted a photo

Installing the frist of many steam bent oak pices for the round frunt cockpit cowling - 100_0796.jpg

DECK BOARDS ADDED AN ROUGH SANDED

falcon6667 — Fri, 2 Mar 2007 15:32:15 MST

falcon6667 posted a photo

DECK BOARDS ADDED AN ROUGH SANDED - 100_0786.jpg

ROUGH SANDED

falcon6667 — Fri, 2 Mar 2007 15:31:10 MST

falcon6667 posted a photo

ROUGH SANDED - 100_0785.jpg

ROUGH FAIRING THE BACK CORNER

falcon6667 — Fri, 2 Mar 2007 15:30:01 MST

falcon6667 posted a photo

ROUGH FAIRING THE BACK CORNER - 100_0781.jpg

LAST FEW PICES ADDED AN CLAMPED IN PLACE (NOTE THE TIEDOWNS TO THE FLOOR)

falcon6667 — Fri, 2 Mar 2007 15:28:30 MST

falcon6667 posted a photo

LAST FEW PICES ADDED AN CLAMPED IN PLACE (NOTE THE TIEDOWNS TO THE FLOOR) - 100_0780.jpg

laying out the \"king\" board for the deck

falcon6667 — Thu, 22 Feb 2007 16:36:23 MST

falcon6667 posted a photo

laying out the \"king\" board for the deck - 100_0749.jpg

5 of the 6 piecses epoxied an screwed in place

falcon6667 — Thu, 22 Feb 2007 16:34:48 MST

falcon6667 posted a photo

5 of the 6 piecses epoxied an screwed in place - 100_0747.jpg

2nd&3rd laminations, in all there will be 6

falcon6667 — Thu, 22 Feb 2007 16:33:19 MST

falcon6667 posted a photo

2nd&3rd laminations, in all there will be 6 - 100_0715.jpg

frist oak pices epoxied together

falcon6667 — Thu, 22 Feb 2007 16:31:04 MST

falcon6667 posted a photo

frist oak pices epoxied together - 100_0710.jpg

frist of many oak pices i have steamed to shape

falcon6667 — Thu, 22 Feb 2007 16:29:39 MST

falcon6667 posted a photo

frist of many oak pices i have steamed to shape - 100_0707.jpg

\"Sweet Caroline\" ready for decking

falcon6667 — Sun, 28 Jan 2007 14:42:13 MST

falcon6667 posted a photo

\"Sweet Caroline\" ready for decking - 100_0452.jpg

many hands makes it easy

falcon6667 — Sun, 28 Jan 2007 10:27:32 MST

falcon6667 posted a photo

many hands makes it easy - 100_0414.jpg

turning jig

falcon6667 — Sun, 28 Jan 2007 10:26:18 MST

falcon6667 posted a photo

turning jig - 100_0378.jpg

roll&tipping the second coat of \"Topsecret\"

falcon6667 — Thu, 4 Jan 2007 13:50:43 MST

falcon6667 posted a photo

roll&tipping the second coat of \"Topsecret\" - 100_0300.jpg

\"Block\" sanding the primer coat of \"Topsecretcoating\" with 400 wet or dry

falcon6667 — Sun, 31 Dec 2006 15:38:06 MST

falcon6667 posted a photo

\"Block\" sanding the primer coat of \"Topsecretcoating\" with 400 wet or dry - 100_0291.jpg

rudder cut to size for the \"Sweet Caroline\"

falcon6667 — Sun, 31 Dec 2006 15:35:47 MST

falcon6667 posted a photo

rudder cut to size for the \"Sweet Caroline\" - 100_0283.jpg

rudder , layed up with fir& mah. ready to be cut to size

falcon6667 — Mon, 25 Dec 2006 13:10:35 MST

falcon6667 posted a photo

rudder , layed up with fir& mah. ready to be cut to size - 100_0262.jpg

I applied 3 coats of epoxie that i added a gigger of mircro ballons an white tint added then block sanded with 80 dry then 180 wet or dry, (i use warm water with a small amount of soap, final sanding before prime is sanded using 220 wet or dry

falcon6667 — Mon, 25 Dec 2006 12:58:25 MST

falcon6667 posted a photo

I applied 3 coats of epoxie that i added a gigger of mircro ballons an white tint added then block sanded with 80 dry then 180 wet or dry, (i use warm water with a small amount of soap, final sanding before prime is sanded using 220 wet or dry - 100_0260.jpg

after block sanding frist coat with 8o grit , second is applied

falcon6667 — Wed, 20 Dec 2006 05:43:50 MST

falcon6667 posted a photo

after block sanding frist coat with 8o grit , second is applied - 100_0192.jpg

frist coat of tinted epoxie

falcon6667 — Wed, 20 Dec 2006 05:42:38 MST

falcon6667 posted a photo

frist coat of tinted epoxie - 100_0191.jpg

screw holes are filled with wooden plugs

falcon6667 — Wed, 20 Dec 2006 05:40:53 MST

falcon6667 posted a photo

screw holes are filled with wooden plugs - 100_0183.jpg

8 year old screw starter, life is good

falcon6667 — Tue, 12 Dec 2006 15:06:52 MST

falcon6667 posted a photo

8 year old screw starter, life is good - 100_0083.jpg

5 year old screw starter,takes alot to beat this pair

falcon6667 — Tue, 12 Dec 2006 15:05:13 MST

falcon6667 posted a photo

5 year old screw starter,takes alot to beat this pair - 100_0080.jpg

my grandson tracing the frame lines on the bottom so i can apply epoxie to under side an frame neatly

falcon6667 — Sun, 10 Dec 2006 17:04:27 MST

falcon6667 posted a photo

my grandson tracing the frame lines on the bottom so i can apply epoxie to under side an frame neatly - 100_0065.jpg

a sharp block plane will finish off the fit, bottom now ready to be epoxed

falcon6667 — Sun, 10 Dec 2006 17:03:33 MST

falcon6667 posted a photo

a sharp block plane will finish off the fit, bottom now ready to be epoxed - 100_0064.jpg

roughing in bottom with rasp, note tape to keep a small gap an not letting the rasp hit the side:)

falcon6667 — Sun, 10 Dec 2006 17:02:31 MST

falcon6667 posted a photo

roughing in bottom with rasp, note tape to keep a small gap an not letting the rasp hit the side:) - 100_0062.jpg

frist coat of epoxie

falcon6667 — Thu, 7 Dec 2006 15:22:58 MST

falcon6667 posted a photo

frist coat of epoxie - 100_0056.jpg

cutless berring is not in stern tube in this shot

falcon6667 — Thu, 7 Dec 2006 15:21:31 MST

falcon6667 posted a photo

cutless berring is not in stern tube in this shot - 100_0043.jpg

shappingthe keel

falcon6667 — Thu, 7 Dec 2006 15:20:12 MST

falcon6667 posted a photo

shappingthe keel - 100_0041.jpg

100_0040.jpg

falcon6667 — Thu, 7 Dec 2006 15:19:14 MST

falcon6667 posted a photo

100_0040.jpg

fiberglass stern tube with \"cutless berring\" installed (trial fit) in the keel with plywood left off

falcon6667 — Sun, 3 Dec 2006 15:25:30 MST

falcon6667 posted a photo

fiberglass stern tube with \"cutless berring\" installed (trial fit) in the keel with plywood left off - 100_0032.jpg

homade fiberglass stern tube trial fit

falcon6667 — Sun, 3 Dec 2006 15:19:41 MST

falcon6667 posted a photo

homade fiberglass stern tube trial fit - 100_0030.jpg

happyness is , only if you have drilled one can you appreciate this

falcon6667 — Sun, 3 Dec 2006 15:18:51 MST

falcon6667 posted a photo

happyness is , only if you have drilled one can you appreciate this - 100_0029.jpg

100_0028.jpg

falcon6667 — Sun, 3 Dec 2006 15:17:56 MST

falcon6667 posted a photo

100_0028.jpg

100_0027.jpg

falcon6667 — Sun, 3 Dec 2006 15:16:52 MST

falcon6667 posted a photo

100_0027.jpg

drilling the hole in the keel, note the block is predrilled to the right angle

falcon6667 — Sun, 3 Dec 2006 15:11:21 MST

falcon6667 posted a photo

drilling the hole in the keel, note the block is predrilled to the right angle - 100_0019.jpg

100_9772.jpg

falcon6667 — Mon, 6 Nov 2006 15:25:59 MST

falcon6667 posted a photo

100_9772.jpg

100_9773.jpg

falcon6667 — Mon, 6 Nov 2006 15:24:50 MST

falcon6667 posted a photo

100_9773.jpg

side skin done

falcon6667 — Sat, 4 Nov 2006 14:48:35 MST

falcon6667 posted a photo

side skin done - 100_9770.jpg

cutting a \"scarf\"joint in plywood with a homemade jig

falcon6667 — Fri, 3 Nov 2006 15:31:20 MST

falcon6667 posted a photo

cutting a \"scarf\"joint in plywood with a homemade jig - 100_8459.jpg

100_8450.jpg

falcon6667 — Fri, 3 Nov 2006 15:30:20 MST

falcon6667 posted a photo

100_8450.jpg

scarf joint epoxed an clamped

falcon6667 — Fri, 3 Nov 2006 15:28:40 MST

falcon6667 posted a photo

scarf joint epoxed an clamped - 100_8452.jpg

100_8448.jpg

falcon6667 — Wed, 1 Nov 2006 16:24:56 MST

falcon6667 posted a photo

100_8448.jpg

100_8442.jpg

falcon6667 — Tue, 31 Oct 2006 15:12:47 MST

falcon6667 posted a photo

100_8442.jpg

Frist 2 sheets of 1/2\" marine ply side planking added with 3to1 epoxie

falcon6667 — Tue, 31 Oct 2006 15:11:15 MST

falcon6667 posted a photo

Frist 2 sheets of 1/2\" marine ply side planking added with 3to1 epoxie - 100_8439.jpg

faring in the chine and the shear, using a 6 ft. sanding board

falcon6667 — Sun, 29 Oct 2006 17:41:36 MST

falcon6667 posted a photo

faring in the chine and the shear, using a 6 ft. sanding board - 100_8427.jpg

Fully framed sweat caroline, frame is fir, stem is 3x 1/2\" ply, alljoints are epoxied with 3to1, the boat is 20 x 6 ft, should cary 6 adults easy, + the boys!

falcon6667 — Fri, 27 Oct 2006 14:40:35 MDT

falcon6667 posted a photo

Fully framed sweat caroline, frame is fir, stem is 3x 1/2\" ply, alljoints are epoxied with 3to1, the boat is 20 x 6 ft, should cary 6 adults easy, + the boys! - 100_8425.jpg

100_8424.jpg

falcon6667 — Fri, 27 Oct 2006 14:39:11 MDT

falcon6667 posted a photo

100_8424.jpg

100_8136.jpg

falcon6667 — Wed, 25 Oct 2006 17:52:02 MDT

falcon6667 posted a photo

100_8136.jpg

100_8135.jpg

falcon6667 — Wed, 25 Oct 2006 17:50:50 MDT

falcon6667 posted a photo

100_8135.jpg

100_8134.jpg

falcon6667 — Mon, 23 Oct 2006 15:03:49 MDT

falcon6667 posted a photo

100_8134.jpg

100_8132.jpg

falcon6667 — Mon, 23 Oct 2006 15:02:31 MDT

falcon6667 posted a photo

100_8132.jpg

keel is epoxied an clamped in place

falcon6667 — Sun, 22 Oct 2006 17:10:25 MDT

falcon6667 posted a photo

keel is epoxied an clamped in place - 100_8129.jpg

first chine log is cut to fit the \"stem\" and keel

falcon6667 — Thu, 19 Oct 2006 17:41:01 MDT

falcon6667 posted a photo

first chine log is cut to fit the \"stem\" and keel - 100_8127.jpg

100_8126.jpg

falcon6667 — Thu, 19 Oct 2006 17:40:21 MDT

falcon6667 posted a photo

100_8126.jpg

chine loggs will be laminated with 1x2x16 first one here is on frames

falcon6667 — Thu, 19 Oct 2006 17:39:37 MDT

falcon6667 posted a photo

chine loggs will be laminated with 1x2x16 first one here is on frames - 100_8125.jpg

transom hung in place. Frames #1,2,3 are inplace, and hold there with 2x4 blocks screwed to the building form. also note long steal straight edge to get transom on the correct plane

falcon6667 — Tue, 17 Oct 2006 17:02:35 MDT

falcon6667 posted a photo

transom hung in place. Frames #1,2,3 are inplace, and hold there with 2x4 blocks screwed to the building form. also note long steal straight edge to get transom on the correct plane - 100_8124.jpg

frame for the boat frames,(note the string for stright hull,)everything is laid out from center lines

falcon6667 — Tue, 17 Oct 2006 10:41:18 MDT

falcon6667 posted a photo

frame for the boat frames,(note the string for stright hull,)everything is laid out from center lines - 100_8123.jpg

shop floor swept, everything is backpiled

falcon6667 — Tue, 17 Oct 2006 10:40:23 MDT

falcon6667 posted a photo

shop floor swept, everything is backpiled - 100_8114.jpg

100_7096.jpg

falcon6667 — Wed, 4 Oct 2006 06:49:13 MDT

falcon6667 posted a photo

100_7096.jpg

100_7095.jpg

falcon6667 — Wed, 4 Oct 2006 06:48:24 MDT

falcon6667 posted a photo

100_7095.jpg

90\" beltsander really squares stuff off

falcon6667 — Mon, 2 Oct 2006 17:18:00 MDT

falcon6667 posted a photo

90\" beltsander really squares stuff off - 100_7134.jpg

100_7135.jpg

falcon6667 — Mon, 2 Oct 2006 17:16:32 MDT

falcon6667 posted a photo

100_7135.jpg

100_7130.jpg

falcon6667 — Mon, 2 Oct 2006 17:15:37 MDT

falcon6667 posted a photo

100_7130.jpg